commercial mammath 11.2 eer r6gp packaged gas electric unit

Mammoth 11.2 EER R6GP Packaged Gas/Electric Unit


Product Features

6-10 Ton Retrofit Solution
The Mammoth 11.2 SEER R6GP Packaged Gas/Electric Unit offers flexibility in the replacement market. These units are designed specifically for retrofit applications and compatibility with most standard footprints. They take less time to install and retrofit, making the contractor’s job more profitable. These units offer flexibility in the replacement market. The Mammoth R6GP comes in 6, 7 1/2 and 10 ton sizes and includes a 1-Year Limited Parts Warranty, a 5-Year Compressor Warranty, and a 10-Year Limited Heat Exchanger Warranty.


  • 5-Year Compressor Warranty
  • 1-Year Parts Warrranty
  • 10-Year Limited Heat Exchanger Warranty

Quality Components
The Mammoth R6GP is built with only quality parts. The included compressor is a state of the art scroll compressor. The high efficiency blower motor meets requirements of NEMA. This system is built with copper tubing and aluminum fin coils. Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.

Two Stage Heating & Cooling
With two-stage cooling and heating rooms will not only keep a more consistent temperature, but the efficiency of heating and cooling each room also goes up. The 7 ½ and 10 ton units feature two-stage cooling. The 6, 7 ½ and 10 ton units all feature two-stage heating.

Built Tough
The Mammoth R6GP is built to last. The hi/low pressure switches ensure long compressor life. The plastic mesh hail guard will never rust and protects the units coil from being damaged. The permanently lubricated condenser fan motors provide long lasting reliability and quiet operation. Also included is a 75 VA transformer which includes a 4 Amp circuit breaker to protect the low voltage circuit. The crankcase heater protects from liquid flood back and future compressor failures. Finally, the Mammoth R6GP includes a durable and attractive cabinet which is designed using 20 gauge galvanized steel with a polyester urethane finish. This cabinet has a 950 hour salt spray finish which is 1.5 mil thick and resists corrosion 50% better than comparable units.

Easy to Install & Service
The Mammoth R6GP is easy to install for the contractor. The system comes with liquid line filter driers factory installed for convenience. The system converts to horizontal airflow with side panels including duct flange and bottom close off panels. The included full perimeter base rail system has rigging holes that do not need to be removed for curb applications and the base rails have fork truck slots on three sides. The Mammoth R6GP fits most standard rooftop applications and can be easily adapted for exceptions.

This packaged gas/electric unit is easy to service. The hi/low service ports allow quick access without disrupting operation. The included easy compressor and control access are designed to make servicing easier for the contractor, and access panels are provided to all controls and the compressor from the side of the unit. The quick-release filter access panels require no special servicing tools. With a removable top grille assemble, it is easy to service the fan motor. This system also features manual reset high pressure control.

Download Documents